Bruce Perreault - Radiant Energy Hands-On Construction Workshop

Radiant Energy
Hands-On
Construction Workshop
Bruce Perreault

Non-polluting Radiant Energy power applications
demonstrated!!!

Bruce Perreault
Nu Energy Horizons, Inc
9 Joffre Street
Concord, NH 03301

(603) 228-0079
nuenergy@cyberportal.net
www.cyberportal.net/nuenergy

Bruce Perreault has quite an extensive background in electronic equipment troubleshooting and repair. Working with innovative electronic schematics for prototypes has only honed his skills as an active experimenter and inventor. He has furthered research in the alternative field by writing essays, articles and research reports. His ideas --though unconventional-- are not out of touch with reality. Mr. Perreault's unique way of looking at problems stems from the fact that he doesn't just accept as a given what the textbooks say; he goes beyond current thinking to bring about truly creative inventions. Bruce is recognized nationally as a forerunner of the next wave of electronic inventive breakthroughs.

In the search for the "Moray valve" Bruce and his assistant Calvin Bahlmann discovered a very startling effect, not only did they rediscover the Moray semiconductor material, but that the material produced a star between two electrodes when excited by certain frequencies. During January 1998, Bruce viewed a Farnsworth fuser videotape from Richard Hull of The Tesla Coil Builder's Association of Richmond VA, demonstrating Farnsworth's fuser to generate a "star-mode" to create the ideal condition for nuclear fusion. Richard Hull stated on this tape that if you can achieve this star mode then you can produce fusion energy.

Bruce, while viewing the videotape showing a Farnsworth Fusor in operation immediately recognized the star effect. He had seen this effect before produced by the Moray material, however, without the associated electron leakage. The star mode within the star chamber is similar to what is created in Farnsworth's electrostatic fusion system. Farnsworth's fusor leaks electrons. The Farnsworth's system has not been able to break even because of grid losses.

Star mode - Side View The "Star-Mode"
The "star-mode" phenomenon is the star effect that is observed between the Moray coated electrodes in Bruce Perreault's system. These pictures provided by International High Technology illustrate this effect.

Bruce points out that this star-mode can be achieved between two pins. Normally, the pins are melted when the arc discharges and a bluish, irratic arc and a smell of ozone is produced.

With a semiconductive coating similar to the Moray Swedish stone applied to each electrode, the star-mode occurs and there is no smell of ozone.

Bruce challenges anyone to reproduce this effect...

Bruce uses a unique on-board circuit, similar to Edwin Gray's undiscovered patent. This circuit design efficiently absorbs the power created by a catalytic reaction within Perreault's specially designed tube. He calls this tube a "star chamber," formerly, "Perreault-valve." This chamber is called a star chamber because it contains two specially coated electrodes designed by Calvin Bahlmann that will create a modus stellaris, this is a Latin rendition of the mode of a star.

The Moray coated electrodes address the problem that has taunted fuser tube researchers for years now... that the star mode leaks out energy because of the grids. No one seems to know why this occurs. Moray electrodes combined with Bruce's high-voltage circuit, stabilizes the star mode and seems to create the proper environment for an efficient nuclear fusion reaction.

During this three-hour workshop, many more facets of radiant energy and its implications will be presented. Every one attending this workshop will get a FREE set of plans. There were hands-on construction training and demonstrations at this workshop. Armed with plans and training, attendees will be equipped to participate in Bruce's validation program.

Order your copy of this conference videotape!!!
Members Only: Select the member priced item to receive your 10% discount!

Ordering Instructions:
Adding Items: Each item must be added by pressing the "Add" button by each item. Only after this is done will an item be added to your cart. Use the "View" button to check your list and insure you have everything you want before checking out.

Shipping & Handling: Shipping and handling charges are added automatically on your invoice based on the number of tapes and destination. We use Priority Mail for tape orders.

Checkout: Check your shopping cart contents at any time using the the "View Contents" button. After you have added all of your tapes to your order,and do not plan to do any more shopping, use the "Checkout" button to bring up the checkout page.

Or Call (520) 424-3581 to place a telephone order!